BIOS WORLD › Online BIOS / ME tools › ME rebuild

ME rebuild

Rebuild the Intel ME region to fix shutdowns after 30 minutes, fans at full speed or no boot after a chip swap or a wrong ME flash.

Use it (log in first)All online tools

What it fixes

The PCH / CPU was replaced, or a BIOS from another machine was flashed, so the ME region no longer matches the board
The laptop shuts down about 30 minutes after power-on (classic ME corruption)
After flashing, fans run at full speed with no display

How to use

Log in → Online tools → choose “ME rebuild”
Upload the board’s original BIOS (full chip dump from a programmer)
Add ME / EC files if asked (use the suggested ones if unsure)
Download the rebuilt BIOS a few minutes later and write it back

What you need

A full BIOS dump (.bin) read by a programmer; the matching ME firmware (optional)

Note：Back up the original BIOS before writing.

Other tools

ME clean / disableReset the ME region to a clean state (or disable it) to fix no-boot and auto-shutdown caused by corrupted ME data. BIOS unlockRemove the BIOS administrator / power-on password, for repairing your own devices or devices brought in by customers. BIOS extractExtract a complete, programmer-ready BIOS image from a vendor BIOS update package (.exe / .cap / encrypted package). Onboard RAM disableDisable a faulty onboard memory chip / channel so the machine boots with the remaining memory or a memory module. Microcode updateAdd or update CPU microcode in the BIOS to fix no-boot or an unrecognized CPU after installing a newer stepping. Surface BIOS buildGenerate a programmable BIOS for Microsoft Surface (enter the model or board number) after a failed flash or a board replacement. Boardview conversionConvert Allegro .brd and other large PCB files into common boardview formats you can open in boardview software or our online viewer.